Here is a real miniature aircraft! This ARF Spitfire, powered by a regular or brushless electric motor of the class 400 is capable of performing all the aerobatics of the real famous WW2 fighter. Easy and quick to build, needs 3 sub miniature servos and a 18A speed controller. The very light frame employs two different types of extruded polystyrene and is covered with the mimetic camouflage films. The kit includes a pair of super light wheels. It isnt a slow flyer but just a true electric scale model able to flight on the normal fields. The super detailed instructions permit to everybody with some building experience to afford this construction. Flying characteristics are excellent.

Key Features:

Scale ARF Electric Warbirds R/C Model Airplane.
The plane is built and painted and it’s a magnificent scale model more nearly ready to fly than most others, new state of the art in highly detailed balsa skin!
A 4CH whole wood construction model! An exact scale airplane to every detail!

Specifications:

Wing Span: 35.8 in / 910mmWing Area:232 sq in / 15 sq dm Flying Weight :14 oz /400g
Fuselage Length : 31.5 in /800 mm

Required:

• 4 channels radio w/3 mini servos
• Fold prep: APC: 9X5 ; 8X6 ; 9X6SFLi-Poly :11.1V 1300-1800mAh
• Brushless Speed 400 Motor, Gearbox:5:1
• Motor Speed: 400
• Gearbox: 5:1 / 6:1

You might also ne interested in:

1. ASM C-130 coast guard arf 4x.25-.36 100″ Kit
2. EDF Foam Bae Hawk (Red Arrow) Jet

This Yakovlev Yak 54 ARF Nitro ARF RC Airplane is inspired by the Russian built Yakovlev Yak 54 aerobatic air show champion. This amazing RC Aircraft features oversized control surfaces plus double bevelled wing and tail feathers for maximum deflection.

The 87″ Yak 54 ARF features airfoiled tail group and dual servos for each aileron for strong and stable handling and unbeatable aerobatic performance. The wing and stabilizers are removable and supported by strong aluminium spars. The Yak 54 has a 10″ diameter round cowl to accommodate a wide selection of engines.

The kit also includes painted fiberglass cowl & wheel pants, aluminum landing gear and tail wheel assembly.
All that’s left to get this 90% prebuilt Almost Ready to Fly package ready for the skies is your choice of engine and radio equipment.

Features:

• Construction: Balsa and Plywood
• Wings: Two Piece with Aluminum Wing Tube
• Stabilizer: Two Piece with Aluminum Tubes
• Covering: High Quality Heat-Shrink
• Radio Compartment: Plywood Construction
• Cowl: Painted Fiberglass
• Wheel Pants: Painted Fiberglass
• Canopy: Tinted, Single
• Landing Gear: Pre-Formed Aluminum
• Aileron, Rudder and Elevator Control: Dual Servo for Each Function Allows for Fine Tuning and Massive Maneuvering Power (Four Servos Control the Ailerons)
• Fuel Tank: 20oz (591cc)
• Wheels: 3.25″ (82mm) Diameter, 1.5″ (29mm) Tailwheel (foam)
• Pushrod Diameter: 4-40
• Building Time: Ready to Fly in Several Hours

Includes:

• Yakovlev Yak 54 ARF Aerobatic Nitro RC Airplane
• Pre-Built and Covered Wings
• Fuselage and Tail Assemblies
• Pushrods
• Pre-Bent Main Landing Gear
• Spring Loaded Tailwheel Assembly
• Foam Main Wheels
• Foam Tailwheel
• Engine Mount
• 20oz Fuel Tank
• Wood Servo Trays
• Aluminum Wing Tubes
• Decal Sheet
• Hardware Package and Photo-Illustrated Instructions.

Specifications:

• Wingspan: 87 in.(221 cm.)
• Wing Area: 1468 sq. in. (94.83 sq. dm.)
• Flying Weight: 16.5-17.5 lbs. (7484 – 7938 g.)
• Length: 84 in.(213 cm.)
• Airfoil: Fully Symmetrical, Mid Wing
• Center of Gravity: 6-7/8 – 7 in. Back from the wing’s leading edge.
• Control Throws (High – Low):
  • Elevator: Up & Down 40 – 20
  • Rudder: Right to Left 40 – 25
  • Ailerons: Up & Down 40 – 20

You might also ne interested in:

1. EDF Foam Bae Hawk (Red Arrow) Jet

ASM A-26 Invader ARF 92″

The ASM Invader model is an exciting replica of the original A-26. Its impressive 92-inch wingspan and 66-inch length results in a great flying model that is easy to see and fly, but because of its three-piece wing, the model breaks down to fit nicely into most vehicles.

Though while not intended to be flown or built by the novice modeller, experienced modellers will find the A-26 Invader is easy to assemble and versatile enough to handle many different power systems.

Required but not included:

For Glow: Two .52 two-stroke or two .70 four-stroke engines (Pitts-style mulfflers can be used on two-stroke engines)
For Electric: Two KMS 4120/05 brushless motors, 2 x 80 amp ESCs and 2 x 4-cell 4000 mah Lipos

APC 13 x 6 props
5+ channel radio with 7-10 servos (2A/2E/2T for Glow/R/2F/Optional G

4 x 12″ servo leads (2F/2T)
2 x 24″ servo leads (2A)
3 x Y-harness (A/F/T)
1 x Y-harness w/reverser

You might also ne interested in:

1. ASM C-130 coast guard arf 4x.25-.36 100″ Kit
2. F-22 Raptor PTS ARF – Grey

This is an ARF kit, Including:

Tenergy 2150mah 11.1v Lipo
Dynam 40A Brushless Speed Controller
Brushless Outrunner & EDF
Foam Glue
Accessories
Landing gear & steerable nose wheel.

This is a beautifully painted and detailed kit. No wonder the BAE Hawk has a cult following and very popular among EDF enthusiasts!
The wing comes lightened and includes balsa inserts for the aileron servos.
It will only take you around 3-4hrs to finish this model.

Requires:

Servos(Aileron, elevator, rudder): 9-20g sized
Receiver
Wiring accessories, such as shrink tube, connectors and 12AWG silicon wire.
5min or 15min Epoxy Glue.

Building tips:

Fan is built into the kit, so be sureto test the power system prior to installation. We recommend epoxy glue for a faster build. Included glue can take up to 1 day to dry completely.

*Plane will fly well if run with a 5S or 6S pack. A 3S pack will not power the EDF sufficiently.
EDF fan has been replaced with a larger and more robust unit.
This model can be flown with push power, pull power or ducted fan power system for it has the capacity of being upgraded. The manual that comes along is based on instruction for push power system or ducted fan system. Comes with glue, pushrods and control horns.

You might also ne interested in:

1. ASM C-130 coast guard arf 4x.25-.36 100″ Kit
2. ASM A-26 Invader Twin 52/70 ARF

Key Features

• Progressive design allows smooth advancement
• Included NACA droops prevent spins and tip stalls
• 3-position flap system and wing tip extensions for speed control and additional lift
• Removable plug-in wings for simple field assembly, easy transportation and storage
• Precision laser-cut parts and the latest assembly techniques
• Prepainted pilot figure installed in cockpit
• Easy access canopy and main hatch
• Covered in exclusive Hangar 9 UltraCote

Overview

Sophisticated sensors, unmatched close-in dogfighting skills and undetectable at long range. The F-22 Raptor, the U.S. Air Forces newest aircraft, is the most advanced stealth fighter in aviation technology. Now Hangar 9s F-22 Raptor PTS is available as a fiery ARF for the more experienced pilot. The F-22 Raptor ARF sports removable NACA droops and wing extensions, and a progressive 3-position flap system for speed control and additional lift. With the addition of two standard servos, the flaps canbe fully operable.

The NACA droops and wing tip extensions attach to the outer section of the wing. They help stabilize the Raptor by manipulating the stock airfoil to produce added lift and increased wing area for lower wing loading. After your training is complete, remove the droops and extensions to transform the trainer into a jet-like fighter. Droops and application tape are supplied but not installed. Flaps can be set specifically for Basic Training in a position that provides speed control and added lift. When youre ready to move up, add two servos and upgrade to functioning flaps with mid and full positions.

Field assembly has never been easier or simpler. The quick-release hatches are spring-loaded to allow easy access to your electronics and fuel tank. A prepainted pilot figure comes installed inside the front hatch. The wing and tail sections bolt and slide together easily for convenient transport and storage. You will need a 3/32 Allen wrench (included) or ball driver to attach the tail.

This one-of-a-kind jet-like fighter is available in stealth gray color scheme, giving pilots at all experience levels the opportunity to fly the Raptor. From training to high-speed loops, rolls and low passes, make your tracks in the sky with the F-22 Raptor.

Lockheed Martin, F-22 Raptor, associated emblems and logos, and body designs of vehicles are either registered trademarks or trademarks of Lockheed Martin Corporation in the USA and/or other jurisdictions, used under license by Horizon Hobby, Inc.

Specs

• Wingspan:52 in (1321mm) (with droops and tip extensions), 47.9 in (1217mm) (without droops and tip extensions)
• Overall Length:50.3 in (1278mm)
• Wing Area:731 sq in (47.2 sq dm) (with droops and tip extensions), 675 sq in (43.6 sq dm) (without droops and tip extensions)
• Flying Weight:7.07.5 lb (3.183.40 kg)
• Engine Size:.40.52 2-stroke
• Radio:4 channels (5 channels with functioning flaps)
• Servos:5 servos (7 servos needed for optional flaps)
• Trim Scheme Colors:Light Grey (HANU882)
• Wing Loading:22.824.78 oz/sq in
• Prop Size:1011 in
• Spinner Size:2 in (included)

Required (Not Included):

.46.52 2-cycle Glow Engine: Evolution .46NT (EVOE0460) or .52NX (EVOE0520)
4-channel radio system (minimum) with receiver: Spektrum DX7 (SPM2710) or JR 6-channel SX600 (JSP16000)
ST47 Servo (JSP20050) (5) or equivalent
6-inch Servo Lead Extension (JRPA095) (2)
Long Servo Arm (JRPA212) (2)
Y-harness (JSP98020)
Receiver Battery (JSP91010)
Receiver (JSP30060)
Switch Harness (JSP98010)
2- or 3-bladed Propeller: (EVOE100P)

Optional/Additional Radio Equipment for Flap Installation:
5-channel radio system (minimum) with receiver
Long Servo Arm (JRPA212) (2)
ST47 Servo (JSP20050)
ST47 Reverse Servo (JSP20050R)
Y-Harness (JSP98020)

You might also ne interested in:

1. ASM A-26 Invader Twin 52/70 ARF

The Advanced Scale Models C-130 is the culmination of 3 years of design and testing. Exceptional detail makes this C-130 a unique plane. The pilots test flew the plane over 60 hours, as much for the enjoyment of seeing such a majestic plane in the air, as well as to hear 4 powerplants humming, and of course to ensure the great flying ability.

Specifications:

• Wingspan: 100″ (2540mm)
• Length: 74″ (1880mm)
• Weight: 16+ lbs

Requires: (not included)

• Engines: 4 x .25-32 two-strokes or 4 x .30 four-strokes, or
  4 x Brushless Electric Motors such as Himark 36-30′s, ESC’s and 11.1v 2500-3200mah LiPo batteries
• Radio: 5-channel (6 with optional retracts)
• 8+ std servos (2A/2E/2F/R/Steering/4T-Glow/Opt G)
• 2 x 6″ servo ext, 2 x 12″ servo ext, 8 x 24″ servo ext, up to 7 Y-harnesses, props, fuel tubing, and glue.

You might also ne interested in:

1. ASM A-26 Invader Twin 52/70 ARF
2. ARF Brushless RC Electric p-51 Mustang Spitfire Warbird
3. EDF Foam Bae Hawk (Red Arrow) Jet